Panasonic AJ-VF15BE, Service Manual

Page: 8 / 59

E– 8
ENGLISH
E– 7
Adjusting the Viewfinder
Mounting the Viewfinder
Stopper screw
Detaching the Viewfinder
Stopper screw
3.
Push the viewfinder down into place.
4.
Tighten the stopper screw firmly.
2.
Insert the plug into the connection jack of the viewfinder.
<Note>
Be sure to insert the plug all the way into the connection jack.
1.
Confirm that the POWER switch of the camera is “OFF”.
3.
Disconnect the connection jack from the viewfinder cable connector.
2.
Loosen the stopper screw and detach the viewfinder by pulling it straight up.
<Note>
Use both hands to detach the viewfinder. The viewfinder may not detach smoothly
with one hand, resulting in damage to the viewfinder.
1.
Confirm that the POWER switch of the camera is “OFF”.
O
Adjusting the height of the mounting unit
Mounting unit
Screws
1.
Detach the two screws, the detach the
mounting unit.
Screws
3.
Secure the mounting unit in place with the two
screws.
2.
Replace the three screws in the positions indicated as
A
or
B
from the present
positions and change the position of the metal fitting.
Camera model number Mounting position
Factory setting
No adjustment of the mounting
height is necessary.
Adjusting the Viewfinder
Adjusting the Mounting Height of the Viewfinder
Change to position
A
For camera models other than those listed above, please refer to the camera’s instruction manual.
PAL regions
AJ-D900W, AJ-D900WA,
AJ-D910WA
NTSC regions
AJ-D810, AJ-D810A,
AJ-D900W, AJ-D900WA,
AJ-D910WA,
AJ-PD900W, AJ-PD900WA
PAL regions
AJ-D700, AJ-D700A,
AJ-D800, AJ-D800A
NTSC regions
AJ-D700, AJ-D700A
Change to position
B
PAL regions
AQ-23W
NTSC regions
AQ-23W
The mounting height of the viewfinder will differ depending on the camera on which it is
mounted.
Adjust the mounting height to match the camera on which the viewfinder is to be
mounted.
Metal fitting
Re-fix the metal fitting by fastening the screws together with the spring washer.