Panasonic AJ- SPX800E, Operating Instructions Manual

Page: 57 / 118

57
4
4
To format the SD card, turn the JOG dial button to move the
cursor to YES. Then, press the dial button.
When the SD card has been formatted, the following
message appears:
The card will not be formatted if the following message appears
when the JOG dial button is pressed:
5
To exit the menu, press the MENU button.
The settings menu disappears and the status of the AJ-
SPX800E is indicated at the top and bottom of the
viewfinder screen.
<Note>
If an SD card is inserted or removed with the <SD CARD
READ/WRITE> screen open, the data title cannot be
edited.
Move the cursor to the option TITLE READ and press the
JOG dial button.
Edit the data title.
To write set data on an SD card:
1
Navigate the menu to the <SD CARD READ/WRITE>
screen.
2
Turn the JOG dial button to move the cursor to the option
[W. SELECT]. Then, press the dial button.
3
Turn the JOG dial button to select a desired number (1 - 8).
Then, press the dial button.
4
Turn the JOG dial button to move the cursor to the option
[TITLE:].
5
Press the JOG dial button. This moves the cursor to the
entry area, putting the AJ-SPX800E in entry mode.
Error message Remedy
CONFIG NG
NO CARD
(No SD card inserted.) Insert an SD card.
CONFIG NG
ERROR
(SD card cannot be formatted.) The card may be defective.
Replace the card.
CONFIG NG
WRITE PROTECT
(SD card is write-protected.) Remove the card and cancel the
protect.
CONFIG NG
CANNOT ACCCESS
(SD card not accessible). Example: The SD card is not
accessible because it is being
played back.
After the operation in process,
format the card.
&21),*2.
To select a file number:
6'&$5'5($':5,7(!
56(/(&7
5($'
:6(/(&7
:5,7(
&$5'&21),*
7,7/(5($'
7,7/(
To give the selected file a title:
6'&$5'5($':5,7(!
56(/(&7
5($'
:6(/(&7
:5,7(
&$5'&21),*
7,7/(5($'
7,7/(
6'&$5'5($':5,7(!
56(/(&7
5($'
:6(/(&7
:5,7(
&$5'&21),*
7,7/(5($'
7,7/(