manualshive.com logo in svg

Panasonic AJ-PX270, Operating Instructions Manual

Share
Download
Panasonic AJ-PX270 Operating Instructions Manual Download Page 164

– 164 –

Chapter 8 Connecting to External Devices — Connecting with headphones, remote control, or TV/monitor

Connecting with headphones, remote control, or TV/monitor

Headphones

Headphones (optional) can be connected to the headphone terminal (3.5 mm stereo mini jack).

Headphone terminal

@

@

NOTE

 

t

When headphones are connected, audio is not output from the speaker.

Remote control

Remote control (optional) can be connected to the <CAM REMOTE> terminals (<FOCUS IRIS>, <ZOOM S/S>).
When the remote control is connected to the <FOCUS IRIS> terminal (3.5 mm mini jack), you can remotely control the focus and iris operations.
When the remote control is connected to the <ZOOM S/S> terminal (2.5 mm super mini jack), you can remotely control the zoom and recording start/
stop operations.

<ZOOM S/S> terminal

<FOCUS IRIS> terminal

@

@

NOTE

 

t

Do not connect a device other than a remote control to the <CAM REMOTE> terminals. Connecting a device other than a remote control may change 
the brightness or cause defocus of images.

 

t

<AUTO>/<MANUAL> can be switched with the remote control, when the iris is adjusted by the remote control with the <AUTO/MANUAL> switch set to 
<AUTO> and [A.IRIS] is set to [OFF] from the main menu 

→

 [AUTO SW].

 

t

When the remote control is connected to the <FOCUS IRIS> terminal, iris can be adjusted only by the remote control and cannot be adjusted by the 
iris ring on the camera.

TV/monitor

A TV or monitor can be connected as shown in the following figure.

Audio cable (optional)

TV/monitor

3.5 mm diameter jack-pin conversion cable

BNC cable (optional)

BNC cable (optional)

HDMI cable (optional)

Summary of Contents for AJ-PX270


























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands