Panasonic AJ-PX270 Operating Instructions Manual Download Page 144

Page: 144 / 217

– 144 –

Chapter 6 Menu Operations — Menu list

Item

Description of settings

[SDI OUT CHAR]

Selects whether to superimpose characters on <SDI OUT> terminal output images.

[ON]:

Superimposes.

[OFF]:

Does not superimpose.

Factory setting: [OFF]

[SDI EDH]

Selects whether to superimpose EDH when output from the <SDI OUT> terminal is SD signal (480i and

576i).

[ON]:

Superimposes.

[OFF]:

Does not superimpose.

Factory setting: [ON]

[HD SDI REMOTE]

Sets whether to use the control function of recording operation for an external device (such as a recorder)

connected to the <SDI OUT> terminal at HD SDI output.

[ON]:

Controls the recording operation of the external device.

[OFF]:

Does not control the recording operation of the external device.

Factory setting: [OFF]

[DOWNCON MODE]

Selects the mode of the down converter output signal mode from the <SDI OUT> or <GENLOCK IN/

VIDEO OUT> terminal in HD mode (1080P, 1080i, or 720P).

[SIDE CROP], [LETTER BOX], [SQUEEZE]

Factory setting: [LETTER BOX]

[DOWNCON SETTING]

[DETAIL]

Turns detail function for the down converter output signal [ON]/[OFF].

[ON], [OFF]

The down converter output signal contains detail components set during HD signal processing.

This setting superimposes the detail components exclusive to down converter output to that signal.

Factory setting: [ON]

[H.DTL LEVEL]

Sets horizontal detail correction level for the down converter output signal.

[0]…[31]

Factory setting: [8]

[V.DTL LEVEL]

Sets vertical detail correction level for the down converter output signal.

[0]…[31]

Factory setting: [4]

[DTL CORING]

Sets the detail noise removal level.

[0]…[15]

Factory setting: [1]

[H.DTL FREQ]

Selects the horizontal detail frequency.

[2.5MHz], [3MHz], [3.5MHz], [4MHz], [4.5MHz]

Factory setting: [3.5MHz]

[VIDEO OUT]

Selects the <GENLOCK IN/VIDEO OUT> terminal output [ON]/[OFF].

[ON]:

Performs output.

[OFF]:

Stops output.

Factory setting: [OFF]

[VIDEO OUT CHAR]

Selects whether to superimpose characters on <GENLOCK IN/VIDEO OUT> terminal output images.

[ON]:

Superimposes.

[OFF]:

Does not superimpose.

Factory setting: [ON]

[VIDEO OUT ZEBRA]

Selects whether the zebra pattern is superimposed over the output video signals from the<GENLOCK IN/

VIDEO OUT> terminal.

[ON]:

Superimposes.

[OFF]:

Does not superimpose.

Factory setting: [OFF]

[TC OUT]

Sets the type of time code output from the <TC IN/OUT> terminal.

[TCG]:

Outputs the time code generator value of the camera at all times.

[TCG/TCR]:

Outputs the time code generator value for camera image output, and the time code value of

the video being played back for video playback output.

Factory setting: [TCG]

[TC OUTPUT REF]

Sets the output delay of time code output from the <TC IN/OUT> terminal.

[RECORDING]:

Outputs the recorded time code with no delay. This is used when performing simultaneous

recording on two cameras with the time code of this camera as the master.

[VIDEO OUT]:

Matches to output images.

Factory setting: [VIDEO OUT]

[NETWORK SETUP]

Configure the settings regarding the network.
[4G/LTE PROPERTY] cannot be selected when the setting is not required on the connected 4G/LTE USB modem.

Item

Description of settings

[USB MODE SELECT]

Sets the camera operation mode when an external device is connected to the USB.

[STORAGE]:

Sets the mode to be used with connected devices such as an external hard disk drive.

[DEVICE]:

Selects the USB device mode for using P2 cards as mass storage, using computers or other

devices connected via USB 2.0.

Factory setting: [STORAGE]

[USB MODE]

Enables/disables the mode selected in [USB MODE SELECT].

[ON], [OFF]

Factory setting: [OFF]

Summary of Contents for AJ-PX270


























































































































































































































Search results

Summary of Contents for AJ-PX270

Reviews:

Related manuals for AJ-PX270

Brands by name

Popular brands

Panasonic AJ-PX270, Operating Instructions Manual

Search results

Summary of Contents for AJ-PX270

Reviews:

Related manuals for AJ-PX270

Brands by name

Popular brands