Main Mode: Using the Unit Connected to a Network
71
M
a
in M
o
de
To transfer clips with the FTP function, you need to set the connection destination and other settings in advance.
Set the settings in the “FTP CLIENT SERVICE” (
➝
page 105) menu item.
CLIENT SERVICE:
• The set password cannot be displayed on the unit.
Note:
• When “WLAN” is set in the “NETWORK SEL” menu item and “DIRECT” is set in the “TYPE” menu item, the FTP client function will not
operate.
Saving the settings of the client service to the SD memory card
• Select “SAVE (SD CARD)” in the “FTP CLIENT SERVICE” menu item.
The settings of the “SERVER URL,” “LOGIN USER,” “LOGIN PASSWORD,” “SSH,” and “SSH PORT” menu items are saved to the SD
memory card.
Loading the settings of the client service from the SD memory card
• Select “LOAD (SD CARD)” in the “FTP CLIENT SERVICE” menu item.
The settings of the client service are loaded from the SD memory card and then reflected in the settings of the unit.
Client settings
Item
Description
Setting value
Factory default
setting
SETTING DATA
Sets from where client service settings
are acquired.
INTERNAL: Uses the settings set on the unit.
INTERNAL
SD CARD: Uses the settings of the file inside the SD
memory card inserted in the SD card slot.
When this item is set to “SD CARD”, insert an SD memory
card before turning on the power of the unit.
SERVER URL
Name or address of connection desti-
nation server
Enter with the full keyboard. (Up to 500 characters)
Unset
LOGIN USER / LOGIN
PASSWORD
User ID and password for connecting
Enter with the full keyboard. (Up to 31 characters for the
user ID and up to 15 characters for the password)
Unset
SSH
Set this to use SSH for file transfers.
ENABLE: Enables SSH.
DISABLE
DISABLE: Disables SSH.
SSH PORT
Set the network port number when us-
ing SSH. Set this to the same number
as on the server side.
Enter with the numeric keyboard.
22
