E-7
Parts and their Functions
①
②
③
④ ⑤
A
Access indicator
Lights green during P2 card access.
◆
NOTE:
• Do not remove a P2 card during access. The file data could be corrupted or
the P2 card could be damaged.
The indicator blinks rapidly when the USB 2.0 connector (POWER) is not
connected. Refer to “Before Calling for Service” (page E-13).
B
P2 Card slot
Insert a P2 card.
The P2 drive is designed for P2 cards and does not work with other cards.
C
EJECT button
Press this button to remove a P2 card from the P2 drive.
D
USB 2.0 connector (SIGNAL connector)
Use the supplied USB cables to connect this connector to a USB 2.0 port on a
personal computer to transfer data and to power the P2 drive from the computer.
E
USB 2.0 connector (POWER connector)
Use the supplied USB cable to connect this connector to a USB 2.0 port on a
personal computer to power the P2 drive from the computer.
◆
NOTE:
• Do not use the P2 drive in an upright position. Otherwise malfunction or damage
to the P2 drive may occur.