33
Recording and Playback
：
Basic Procedures
R
e
c
o
rd
in
g a
n
d
P
la
y
ba
c
k
For shooting, follow the steps below.
1
Select a filter according to light conditions.
2A
When the white balance is saved:
Position the WHITE BAL switch to [A] or [B].
2B
When the white or black balance is not saved and
you have no time to adjust the white balance:
Position the WHITE BAL switch to [PRST].
This adjusts the white balance against the filter
according to the position of the FILTER control.
2C
If the white balance is adjusted on the spot:
Position the WHITE BAL switch to [A] or [B] and shoot
a white test subject so that it appears at the center of
the screen. Then, follow the steps below to adjust the
white balance.
1. Press the AUTO W/B BAL switch toward [AWB] to
adjust the white balance.
2. Press the AUTO W/B BAL switch toward [ABB] to
adjust the black balance.
3. Press the AUTO W/B BAL switch toward [AWB] to
adjust the white balance again.
For directions on making adjustments, see [Adjusting
the White Balance
] (page 45) and [Adjusting the Black
3
Point the camera at your subject to adjust the focus,
and zoom.
4
To use the electronic shutter, set the shutter speed
and operation mode.
For more information, see [Setting the Electronic
Shutter
5
Press either the REC START/STOP button, REC
button on the handle or VTR button at the lens to start
recording.
During recording, the REC lamp in the viewfinder
stays illuminated.
6
To stop recording, press either the REC START/STOP
button, REC button on the handle or VTR button at
the lens.
The REC lamp in the viewfinder goes out.
White/Black balance adjustment to recording completion
Shooting
White/Black Balance Adjustment to Recording Comple-
tion
Operation Buttons
During recording, all operation buttons (REW, FF, PLAY/
PAUSE, STOP) are disabled.
1
3
2A, B, C
2C
4 5, 6
AJ-HPX2000P(VQT1D27-1)E.book 33 ページ ２００７年７月３０日 月曜日 午後１時３１分
