62
Adjustments and Settings for Recording : Setting Time Data
The unit’s internal time code generator can be locked to an
external generator. In addition, the external time code
generator can be locked to the unit’s internal generator.
As the figure shows, connect both the reference video
signal and reference time code.
Example 1:
When locking onto an external signal
Note
In place of the HD Y reference signal, composite video
signals can be input as the reference video signal.
Example 2:
When connecting a multiple number of units
and using one of them as the reference unit
Note
The system can be configured with multiple units by
opening the <GENLOCK> screen from the SYSTEM
SETTING page and setting the GL PHASE item to the
connector using menu operations.
The phase of the time code can correspond to either the
HDY output signals of the MON OUT connector or VBS
output signals of the VIDEO OUT and MON OUT
connector.
However, the same value should commonly be set to the
GL PHASE for all cameras. If different values coexist in the
system, the shooting timing may not correspond to each
other.
Setting of GL PHASE
Externally Locking the Time Code
Example of connections for external locking
GENLOCK IN
TC IN
Reference time
code
Reference video
signal
Reference video signal
Setting of GL PHASE
MON OUT (VBS) or
VIDEO OUT (VBS)
COMPOSIT
Item
Variable
range
Remarks
GL PHASE
HD SDI
COMPOSIT
For selecting the output signals that
lock phases to the signals that are
input in the GENLOCK IN connector.
HD SDI:
For locking the HD SDI signals to
the GENLOCK input.
For the down converter output
signals, the start position of the
video delays by about 90 lines.
COMPOSIT:
For locking the down converter
output signals to the GENLOCK
input.
For the HD SDI output signals, the
start position of the video gains by
about 90 lines.
GENLOCK IN
TC IN
TC OUT
GENLOCK IN
TC IN
TC OUT
TC OUT
MON OUT or
VIDEO OUT
(VBS)
Reference unit
To the next camera
MON OUT or
VIDEO OUT
(VBS)
MON OUT or
VIDEO OUT
(VBS)
AJ-HPX2000P(VQT1D27-1)E.book 62 ページ ２００７年７月３０日 月曜日 午後１時３１分