A. Single Spot Picture
1. Set the MODE SELECT/CAMERA SELECT switch to
CAMERA SELECT.
2. Press one of the camera selection buttons for dis-
play on the monitor.
The LED on the selected button lights and the
selected camera picture appears on the monitor.
B. Single Spot Picture Sequences
1. Set the MODE SELECT / CAMERA SELECT switch
to CAMERA SELECT.
2. Press the SEQUENCE / ALARM RESET button.
A sequence of single pictures is displayed in the
order and dwell time selected for the SEQUENCE
SETUP parameter in MENU 3 OF 3.
-15-
Before starting operation, set up the items in MENU 1-3
OF 3.
Set SYSTEM MODE in MENU 3 OF 3 to MULTIPLEX or
MULTISCR depending on your specific needs.
MULTIPLEX Mode
Select this mode to monitor camera pictures or play-
back pictures.
The operations enabled in MULTIPLEX mode are
described below.
■
Monitoring the Camera Picture
Caution:
Set the time lapse VTR to the stop mode or
recording mode.
1. Set the MODE SELECT/CAMERA SELECT switch to
MODE SELECT.
2. Press button 8 (CAMERA/VTR). The CAMERA / VTR
indicator goes off.
3. Press button 16 (STILL ON). The STILL ON indicator
goes off.
CAMERA/VTR
8
STILL ON
16
ENTRANCE
Camera Picture
OPERATION
Camera 3 Picture
Camera 6 Picture
Example of single spot picture sequence
CAMERA
SELECT
MODE
SELECT
3. To cancel the sequence, press the desired camera
selection button.
The selected camera picture appears in spot on the
monitor.
Summary of Contents for AJ-FX216
Page 3: ......
