-10-
1. Move the cursor to SETUP in TITLE SETUP.
B. Setting up MENU 2 OF 3 in
MULTIPLEX mode
The context of MENU 2 OF 3 will not change if the
SYSTEM MODE parameter in MENU 3 OF 3 is
changed.
An example is shown below.
1. TITLE SETUP
A title consisting of up to 8 alphanumeric characters
can be displayed on the monitor.
* MENU 2 OF 3 *
TITLE SETUP *
TITLE POSITION *
TITLE DISPLAY ON
STILL/ALARM DISP ON
* MENU 2 OF 3 *
TITLE SETUP *
TITLE POSITION *
TITLE DISPLAY ON
STILL/ALARM DISP ON
** TITLE **
1........ 9........
2........ 10........
3........ 11........
4........ 12........
5........ 13........
6........ 14........
7........ 15........
8........ 16........
2. Press button 15 (SET). The TITLE menu appears on
the monitor.
3. Move the cursor to the channel number whose title
is to be edited by pressing buttons 9-12 (
D
D
,
C
C
,
A
A
,
B
B
).
4. Select the first character for the title by pressing
button 13 (
−
) or 14 (+).
Characters for the title can be selected from the fol-
lowing list:
5. After selecting the first character, press button 12
(
B
B
). Then select the second character.
6. Repeat steps 3 to 5 above to complete the title.
7. Repeat steps 3 to 6 to edit the other channels.
8. Press button 15 (SET) to finalize the character
selection. The title is set, and the display returns to
MENU 2 OF 3.
To erase a specific character
1. Select a character to be erased.
2. Select “•” (space mark) to erase the character.
To erase the title of a specific channel
1. Move the cursor to the channel number whose title
is to be erased.
2. Press buttons 13 (
−
) and 14 (+) simultaneously.
2. TITLE POSITION
You can select the position on the monitor where
you want the title to be displayed.
1. Move the cursor to POSITION in TITLE POSITION.
ABCDEFGHIJKLM
NOPQRSTUVWXYZÄÜÖÆÑÅØ
0123456789
←→
=?’”#&()*+,
-·/:;.
(space mark)
2. Press button 15 (SET). The TITLE POSITION setting
is on stand by.
* MENU 2 OF 3 *
TITLE SETUP *
TITLE POSITION *
TITLE DISPLAY ON
STILL/ALARM DISP ON
1
2
3
4
5
6
7
3. Select the position where the title is to be displayed
by pressing button 11 (
A
A
) or 12(
B
B
). You can
select any of the 7 positions shown in the diagram
above.
4. Press button 15 (SET) to finalize the title position.
The title position is set, and the display returns to
MENU 2 OF 3.
Note:
All channel titles will be displayed in the same
position.
You cannot specify a different position for each
title.
Summary of Contents for AJ-FX216
Page 3: ......