Panasonic AJ-D908MC, Service Manual

Page: 106 / 421

MECH-65
1-21. CTL Self Recording Level Confirmation
TEST POINT CTL: TP1(SERVO P.C.B.)
PLAY(+1) PLAY on 25M mode
REV(-1) REV -1 on 25M mode(how to set PLAY and REV x1 mode, refer to below
description)
VTR MODE
REV(-0.2) No required
<25M mode setting procedure>
1. Press the “MENU button” pushing “HOLD button” and “LIGHT button” together so that “CAM SERVICE MENU”
screen is appears on VF and VIDEO OUT.
2. Press the “JOG DIAL button” to select the “MAIN MENU” (Menu display is change like below)
CAM SERVICE MENU
→
VTR SERVICE MENU
→
MAIN MENU
3. Set the item “REC MODE” to 25M MODE referring following process.
MAIN MENU
→
SYSTEM SETTING
→
SYSTEM MODE
→
REC MODE 4:3/25M (or 16:9/25M)
<REV(-1) Mode Setting Procedure>
1. Set the VTR to STILL mode by press PLAY button twice.
2. Keep pressing RESET button and press PLAY button.
Click this button , then go to item “1-21. CTL Self Recording Level Confirmation” .
1-23. Confirmation of Envelope on REV, REW and FF mode
TEST POINT R/P ENV: TP1(HEAD BUFFER P.C.B.), R/P HSW: TP2(HEAD BUFFER P.C.B.)
<REV(-1) Mode Setting Procedure>
1. Set the VTR to STILL mode by press PLAY button twice.
2. Keep pressing RESET button and press PLAY button.
Click this button , then go to item “1-23. Confirmation of Envelope on REV, REW and FF mode ” .
1-24. Confirmation of Play Start Envelope
TEST POINT R/P ENV: TP1(HEAD BUFFER P.C.B.), R/P HSW: TP2(HEAD BUFFER P.C.B.)
Click this button , then go to item “1-24. Confirmation of Play Start Envelope” .
1-25. REV mode Tape Path Limit Confirmation
<REV(-1) Mode Setting Procedure>
1. Set the VTR to STILL mode by press PLAY button twice.
2. Keep pressing RESET button and press PLAY button.
Click this button , then go to item “1-25. REV mode Tape Path Limit Confirmation” .
1-30. LISTA Connection and Boot Up
ATF ATF ERR: TP601(SERVO P.C.B.)
HSW R/P HSW: TP109(SERVO
P.C.B.
)
TEST POINT
GND GND: TG300(SERVO
P.C.B.
)
Click this button , then go to item “1-30. LISTA Connection and Boot Up” .