MECH-61
6. Table of Test Point for each adjustment item.
1-3. Tension Arm Offset Adjustment
TEST POINT
TENSION : TP402(SERVO P.C.B.)
ADJ.
TENSION OFFSET : VR402(SERVO
P.C.B.
)
Click this button , then go to item “1-3. Tension Arm Offset Adjustment” .
1-4. Tension Arm Neutral Position Adjustment
ADJ.
TENSION : TP402(SERVO P.C.B.)
<No Tape loading procedure>
1. Press the “MENU” button pushing “HOLD button” and “LIGHT button” together so that “CAM SERVICE MENU”
screen is appears on VF and VIDEO OUT.
2. Press the “JOG DIAL button” to select the “VTR SERVICE MENU” (Menu display is change like below)
CAM SERVICE MENU
→
VTR SERVICE MENU
→
MAIN MENU
3. Rotate the “JOG DIAL button” to select the item “VTR SERVICE 2/3” in “VTR SERVICE MENU” screen and
press the “JOG DIAL button” to open the “VTR SERVICE 2/3” menu screen.
4. Select item “TENSION” rotating “JOG DIAL button” and press “JOG DOAL button”, then mechanism to set
loading complete condition.
Click this button , then go to item “1-4. Tension Arm Neutral Position Adjustment” .
1-5. Tension Arm PLAY and REV Voltage Adjustment and Confirmation
TEST POINT
TENSION : TP402(SERVO P.C.B.)
ADJ.
TENSION GAIN : VR401(SERVO P.C.B.)
<No Tape loading procedure>
1. Press the “MENU” button pushing “HOLD button” and “LIGHT button” together so that “CAM SERVICE MENU”
screen is appears on VF and VIDEO OUT.
2. Press the “JOG DIAL button” to select the “VTR SERVICE MENU” (Menu display is change like below)
CAM SERVICE MENU
→
VTR SERVICE MENU
→
MAIN MENU
3. Rotate the “JOG DIAL button” to select the item “VTR SERVICE 2/3” in “VTR SERVICE MENU” screen and
press the “JOG DIAL button” to open the “VTR SERVICE 2/3” menu screen.
4. Select item “TENSION” rotating “JOG DIAL button” and press “JOG DOAL button”, then mechanism to set
loading complete condition.
Click this button , then go to item “1-5. Tension Arm PLAY and REV Voltage Adjustment” .
Summary of Contents for AJ-D908MC
