– 71 –
Setting the Electronic Shutter
Setting the Synchro Scan Mode
1
Set the MENU SET/OFF switch to SET.
The page on which the previous setting menu operations were completed appears on the
viewfinder screen. (When the menu is used for the first time, the first page appears.)
2
Press the PAGE button repeatedly until the SYNCHRO SCAN page shown below appears.
(This operation can also be performed using the PAGE
o
UP/DOWN function.)
3
Press the UP (the value increases) or DOWN (the value decreases) button repeatedly to
display the desired frequency. The frequency can be switched continuously within the range
of 30.4 Hz to 250.0 Hz.
4
When menu operations have been completed, set the MENU SET/OFF switch to OFF. The
setting menu disappears from the viewfinder screen and the displays indicating the unit’s
current status appear at the top and bottom of the viewfinder screen.
(If S. SCAN MODE SEL on the FUNCTION 2/5 page of the setting menu is set to ON, the
shutter speed can be varied by the SUPER IRIS and MODE CHECK switches. However,
care should be taken at this time as the SUPER IRIS and MODE CHECK functions cannot
be operated only during SYNCHRO SCAN mode.)
- SYNCHRO SCAN -
1 / 6 1 . 7
