– 125 –
Specifications
VTR Section
VTR Video System
(during playback on a standard playback unit)
Bands:
Brightness; 30 Hz to 5.75 MHz
o
1.0 dB/
p
3.0 dB
S/N ratio:
55 dB
K factor (2T pulse):
Within 2%
Y/C delay:
Within 30 ns
VTR Audio System
(during playback on a standard playback unit)
Sampling frequency:
48 kHz (synchronized to video)
Quantization:
16-bits/sample
Frequency response:
20 Hz to 20 kHz
t
1.0 dB (at reference level)
Dynamic range:
80 dB or more (at 1 kHz, AWTD)
Distortion:
Within 0.1% (at 1 kHz, operating level)
Wow/flutter:
Below measurable limit
Head room:
20 dB
Emphasis:
T1
r
50
¯
s, T2
r
15
¯
s (can be turned ON/OFF)
VTR Tape Running System
Tape speed:
33.820 mm/s
Recording/playback time:
Approx. 66 min. (using the AJ-P66MP)
FF/REW time:
Approx. 3 min. (using the AJ-P66MP)
Connectors
Input
AUDIO IN CH1/CH2
(XLRX2, 3-pin, female):
MIC/LINE switchable, balanced, more than 10 kohm
MIC; Menu setting to
p
60/
p
50/
p
40 dBu
LINE; Menu setting to
p
6/0/
o
4 dBu
MIC IN (XLR, 3-pin, female):
Phantom
o
48 V, balanced, 3 kohm
Menu setting to
p
60/
p
50/
p
40 dBu
GENLOCK IN (BNC):
1.0 Vp-p, 75 ohm
Output
CAMERA OUT (BNC):
1.0 Vp-p, 75 ohm
VIDEO OUT (BNC):
1.0 Vp-p, 75 ohm
AUDIO OUT (CH1/CH2/MIX)
(XLR, 3-pin, male):
o
4 dBu, balanced, low-impedance
(Menu setting to CH1/CH2/MIX)
PHONES (mini-jack
·
1):
Other
DC IN (XLR, 4-pin, male):
DC 11 to 17 V
DC OUT (4-pin):
DC 11 to 17 V, maximum rated current; 0.1 A
LENS (12-pin):
REMOTE (ECU, 6-pin):
Accessories
Microphone kit
Tripod attachment
Sony battery connector (screw included)
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.