Panasonic AJ-D250P, Operating Instructions Manual

Page: 42 / 80

42
RS-232C
O
Display control commands
Sends data of computer Return data from VTR Description of command
[STX] DFC:m [ETX] [STX] DFC [ETX] Sets the display mode of the display counter.
O
Input/output control commands
Sends data of computer Return data from VTR Description of command
[STX] IEV:data [ETX] [STX] IEV [ETX]
Switches between E-E and V-V output.
E-E: Electric modulation to electric playback
V-V: VTR to VTR recording
O
Edit control commands
Sends data of computer Return data from VTR Description of command
[STX] EAB:m [ETX] [STX] EAB [ETX] Sets the auto back recording.
[STX] EAD:m [ETX] [STX] EAD [ETX] AUDIO INSERT PAUSE
[STX] EIN [ETX] [STX] EIN [ETX] VIDEO INSERT PAUSE
[STX] EFE:data [ETX] [STX] EFE [ETX] FIRST EDIT
O
Media operation control commands
Sends data of computer Return data from VTR Description of command
[STX] HRE:m [ETX] [STX] HRE [ETX]
Sets the VTR’s operation mode at the tape end (when
recording).
[STX] HTE:m [ETX] [STX] HTE [ETX]
Sets the VTR’s operation mode at the tape end (at all times
other than recording).
[STX] HTI:m [ETX] [STX] HTI [ETX] Sets the VTR’s operation mode when the tape is inserted.