Panasonic AJ-D250P, Operating Instructions Manual

Page: 29 / 80

29
OPERATION menu
The underlining denotes the factory mode setting.
Setup Menus
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
100 LOCAL ENABLE
0000
0001 DIS
ST&EJ
For selecting the switches which can be operated on the front panel in the
REMOTE mode.
0: None of the switches can be operated.
1: Only the STOP switch and EJECT switch can be operated.
101 TAPE TIMER
0000
0001 12H
24H
For selecting the CTL counter display.
0: ±12-hour display
1: 24-hour display
102 S/F/R EE SEL
0000
0001 EE
TAPE
For selecting the EE or VV output in the STOP, FF or REW mode.
0: E-E (electric modulation to electric playback) is output.
1: V-V (VTR to VTR recording) is output.
103 WIDE MODE
0000
0001
0002 AUTO
WIDE
NORMAL
For selecting the WIDE mode.
0: The mode is detected automatically.
1: The mode is forcibly treated as WIDE.
2: The mode is forcibly treated as NORMAL.
104 TAPE IN MOD
0000
0001
0002
0003 STOP
REW
PAUSE
PLAY
For selecting the operation which is to be performed when the cassette has
been inserted into the unit.
0: STOP
1: REWIND
2: PLAY PAUSE
3: PLAY
105 TAPE END MOD
0000
0001
0002
0003 STOP
REW
REW EJ
EJECT
For selecting the operation which is to be performed when the tape has
arrived at the end.
0: STOP
1: REWIND
2: The tape is rewound and, upon completion of rewinding, it is ejected.
3: EJECT
106 AUTO BACK
0000
0001 OFF
ON
For selecting whether the tape is be automatically rolled back in order to
ensure frame to frame continuity.
0: The tape is not automatically rolled back.
1: The tape is automatically rolled back.
107 FORMAT SEL
0000
0001
0002 DVCPRO
DV
DVCAM
For selecting the format when an L cassette is to be used.
0: DVCPRO mode
1: DV mode
2: DVCAM mode
108 REC INHIBIT
0000
0001 OFF
ON
For selecting whether to inhibit recording on the unit.
0: Recording is allowed.
1: Recording is inhibited.
109 CAP. LOCK
0000
0001 2F
4F
For selecting the capstan lock mode.
0: The 2F lock mode is selected for the capstan.
1: The 4F lock mode is selected for the capstan.
110 FF. REW MAX
0000
0001 X32
X60
For setting the maximum FF and REW speed.
0: 32 times normal tape speed
1: 60 times normal tape speed
112 BGN PRESET For setting the BEGIN point.
113 END PRESET For setting the END point.
111 MEMORY MODE
0000
0001
0002
0003
OFF
M-STOP
REPT1
CONT
For setting the memory operation.
0: The memory operation is not performed.
1: The tape is stopped during FF or REW near the BEGIN point.
2: When the tape arrives at the end, it is rewound to the BEGIN point where
it stops.
3: When the tape arrives at the end, it is rewound to the BEGIN point and
played. This sequence is repeated.