Panasonic AGVP310 - DVD/VCR DECK Operating Instructions Manual Download

Page: 23 / 64

Important:

If a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.

• Please read the disc jacket for operation

information.

• If a single sided disc is placed in upside

down, “THIS TYPE OF DISC CANNOT
BE PLAYED. PLEASE INSERT A
DIFFERENT DISC” is displayed.

• Remove disc and press DECK POWER

off when not in use.

• Disc continues to rotate with menu

displayed even after play is done.
Press STOP to clear menu display when
finished with menu.

Notes

V.S.S.

(Virtual Surround Sound)

Press

VSS

in DVD mode.

• The Surround sound effect can be

changed by pressing VSS repeatedly as
shown by the figure below.

• Surround sound effect is available in DVD

mode only.

• Turn off the surround effects on the other

equipment.

• V.S.S. will not work, or will have less

effect, with some discs.

• Turn V.S.S. off if it causes distortion.
• Sound will only come from the two front

speakers if V.S.S. is on.

Enjoy a surround-like effect if you are
using two front speakers only. The effect
is broadened and sound seems to come
from virtual speakers on either side if the
disc has surround signals recorded on it.

Note

DECK memorizes the point where STOP is
pressed (

STOP

is displayed on screen).

Press

PLAY

to resume play from this point.

Pressing

STOP

again or opening the tray

cancels RESUME, however, RESUME is not
canceled when power is turned off and on.
• RESUME works only with discs for which

elapsed play time is displayed during play.

• When a DVD-RAM still picture is played

back, the counter will not be displayed,
however RESUME will function.

Resume Function

VSS OFF

VSS OFF (default)

VSS1

VSS3

VSS2

■

Forward/Reverse Scene Search

Press

FF/SLOW+

REW/SLOW-

during play.

Press

PLAY

to release.

• Search speed, slow at first, increases with each

additional press of the button up to 5 levels.

■

Forward/Reverse Chapter/Track Skip

Press

SKIP+

SKIP-

during play.

Each press skips a chapter (DVD-Video),
track (DVD-Audio/CD) or Program/Play List/
Marker (DVD-RAM).

DVD-Video, DVD-Audio and CD

•

Pressing

SKIP-

once midway through a

chapter/track returns to the start of that
chapter/track. Each additional press skips
back one chapter/track.

DVD-RAM

•

Pressing

SKIP-

once midway through a

program/play list returns to the start of that
program/play list. Each additional press skips
back one program/play list.

Reverse Skip Forward Skip

Current playback position

Chapter/Track Chapter/Track

Chapter/Track

Program/Play List Program/Play List Program/Play List

Reverse Skip Forward Skip

Current playback position

Marker

Power turns off after DECK has been in
Stop mode (DVD) for about 5 minutes.

Auto-Power Off Function

• When

appears on the screen while a button is

being operated, it means that the corresponding
operation is prohibited by DECK or the disc.

■

Still Picture or Pause

Press

PAUSE/STILL

during play.

Press

PLAY

to release.

•

DVD :

DECK will enter still picture mode.

•

CD :

DECK will enter pause mode.

■

Frame by Frame Picture

(DVD)

Press

PAUSE/STILL

in still mode.

Press

PLAY

to release.

• Each press advances picture one frame.
• Hold button down for consecutive frame advance.
• Whether pictures are advanced by “FRAME” or

“FIELD” is selected automatically. (See p. 54.)

■

Slow Motion Picture

(DVD)

Press

FF/SLOW+

REW/SLOW-

in still mode.

Press

PLAY

to release.

• Slow motion speed, slow at first, is increased

with each additional press of the button up to
5 levels.

Basic

Operation

AG-VP310 P1-25 (040510).p65

2004/05/10, 15:01

Summary of Contents for AGVP310 - DVD/VCR DECK

































































Search results

Summary of Contents for AGVP310 - DVD/VCR DECK

Reviews:

Related manuals for AGVP310 - DVD/VCR DECK

Brands by name

Popular brands

Panasonic AGVP310 - DVD/VCR DECK, Operating Instructions Manual

Search results

Summary of Contents for AGVP310 - DVD/VCR DECK

Reviews:

Related manuals for AGVP310 - DVD/VCR DECK

Brands by name

Popular brands