Panasonic AGRT850 - TIME LAPSE VTR, Operating Instructions Manual

Page: 27 / 32

27
All status request command
When the all status request command has been received, the
current deck status is detected and sent by the bitmap shown
below.
PC: [STX] QOS [ETX]
VTR: [STX] OPS
abcdef [ETX]
Automatic send setting command
This sets whether to detect changes in the deck status and
send the status automatically.
PC: [STX] OCS: ∗ [ETX]
VTR: [STX] OCS [ETX]
ab Counter commands cc: Returns fixed value.
Bit 7 6 5 4 3 2 1 0
cd REC
LOCK
ON=1 PAL
PAL
=1 Tracking
(–) (+)
ON=1 Tape speed
00 : 2h
10 : 4h
01 : 6h Repeat
REW
ON=1 Alarm
IN
Usually=0
ef Test mode
00: Normal
10: Line
01: Service
11: Reverse play
Forward
direction=0 Cassette
IN
IN=1
∗ : N=Automatic send ON
F=Automatic send OFF
Automatic send setting request command
This is for verifying the automatic send setting.
PC: [STX] QSC [ETX]
VTR: [STX] OCS
∗ [ETX]
∗ : N=Automatic send ON
F=Automatic send OFF
ACK return status request command
This is for verifying the ACK return status.
PC: [STX] QRA [ETX]
VTR: [STX] RA
∗ [ETX]
∗ : N = ON
F = OFF
Search command
• Forward
PC: [STX] OSF: ∗ [ETX]
VTR: [STX] OSF [ETX]
• Reverse
PC: [STX] OSR: ∗ [ETX]
VTR: [STX] OSR [ETX]
∗ : 0 = still (Play/Pause)
1 = 1/30 ×
2 = 1/10 ×
3, 4 = 1/5 ×
5, 6 = 1.0 ×
7 = 5.0 ×
8-F = 9.0 ×
Time setting command
This sets the minutes and seconds to zero.
Time setting will change in the following manner:
HH:00:00 – HH:14:59
→ HH:00:00
HH:45:00 – HH:59:59 → HH+1:00:00
The time setting command will be disregarded for other
times.
PC: [STX] LTJ [ETX]
VTR: [STX] LTJ [ETX]