background image

2

IMPORTANT

“Unauthorized recording of copyrighted televi-
sion programs, films, video tapes and other 
materials may infringe the right of copyright 
owners and be contrary to copyright laws.”

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, 
within an equilateral triangle, is intended to alert 
the user to the presence of uninsulated 
“dangerous voltage” within the product’s 
enclosure that may be of sufficient magnitude to 
constitute a risk of electric shock to persons.

The exclamation point within an equilateral 
triangle is intended to alert the user to the pre-
sence of important operating and maintenance 
(servicing) instructions in the literature 
accompanying the appliance.

CAUTION:

To reduce the risk of fire or shock hazard and 
annoying interference, use the recommended 
accessories only.

WARNING:

To reduce the risk of fire or shock hazard, 
do not expose this equipment to rain or 
moisture.

FCC Note:

This device complies with Part 15 of the FCC Rules.
To assure continued compliance follow the attached 
installation instructions and do not make any 
unauthorized modifications.

This equipment has been tested and found to 
comply with the limits for a Class A digital device, 
pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection 
against harmful interference when the equipment is 
operated in a commercial environment. This 
equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause 
harmful interference to radio communications. 
Operation of this equipment in a residential area is 
likely to cause harmful interference in which case 
the user will be required to correct the interference 
at his own expense.

CAUTION:

Do not install or place this unit in a bookcase, 
built-in cabinet or in another confined space in 
order to keep well ventilation condition. Ensure 
that curtains and any other materials do not 
obstruct the ventilation condition to prevent 
risk of electric shock or fire hazard due to 
overheating.

Lithium Battery

Replace battery with part No. VL2330/1HF only.
Use of another battery may present a risk of fire or 
explosion.
Caution—Battery may explode if mistreated.
Do not recharge, disassemble or dispose of in fire.

Do not insert fingers or any objects into the video casette 
holder.
Avoid operating or leaving the unit near strong 
magnetic fields. Be especially careful of large audio 
speakers.
Avoid operating or storing the unit in an excessively hot, 
cold, or damp environment as this may result in damage 
both to the recorder and to the tape.
Do not spray any cleaner or wax directly on the unit.
If the unit is not going to be used for a length of time, 
protect it from dirt and dust.
Do not leave a cassette in the recorder when not in use.
Do not block the ventilation slots of the unit.

Use this unit horizontally and do not place anything on 
the top panel.
Cassette tape can be used only for one-side, one 
direction recording. Two-way or two-track recordings 
cannot be made.
Cassette tape can be used for either Color or Black & 
White recording.
Do not attempt to disassemble the recorder.
There are no user serviceable parts inside.
If any liquid spills inside the recorder, have the recorder 
examined for possible damage.
Refer any needed servicing to authorized service 
personnel.

 is the safety information.

Summary of Contents for AGRT850 - TIME LAPSE VTR

































Reviews: