Panasonic AG520VDH - COMB. DVD/VCR/TV, Service Manual

Page: 29 / 100

Fig. E2-1
7.3.5.1. How to adjust:
1. Press UP/DOWN key on the remote control to
select control function to be adjusted.
Important Note:
Make a note of the original value of the controls
before modifying in case the wrong control is
adjusted.
2. Press RIGHT/LEFT key on the remote control so
that the shaded area moves to the value.
Fig. E2-2
3. Press UP/DOWN key on the remote control to
adjust the value of the selected control.
Fig. E2-3
Note:
You can select a desired channel by using the
numbered
keys on the remote control in EVR
adjustment mode.
4. Press RIGHT/LEFT key on the remote control so
that the shaded area moves to the control function.
Fig. E2-4
5. Press UP/DOWN key on the remote control to
select a control function for the next adjustment if
necessary.
Fig. E2-5
7.3.5.2. How to release from EVR
Adjustment Mode:
Press and hold STOP/EJECT, PLAY and VOL- buttons of VCR
operation panel on the unit together over 5 seconds again or
press the POWER button OFF to release EVR adjustment
mode. The adjusted value will be written to Memory IC
(IC6004).
7.3.6. HOW TO ENTER SERVICE MODE
1. Set the unit to TV Mode.
2. Enter EVR adjustment mode.
3. Press DISPLAY key on the remote control for collapse
scan.
Note:
Before pressing DISPLAY key on the remote control for
collapse scan, select the desired control function and move
the shaded area to the value for adjustments you will
proceed.
Fig. E2-6
7.3.6.1. How to release from Service
Mode:
Press DISPLAY key again on the remote control.
29
AG-520VDH