Panasonic AG520VDH - COMB. DVD/VCR/TV Operating Instructions Manual Download Page 18

Page: 18 / 56

MTS Broadcast / TV Stereo System

The following are possible audio broadcast types and on-screen

displays. The signal being received is indicated with a “ ” mark

while the selected audio mode is indicated with an arrow. To

change the audio mode for these broadcasts, see the “Audio Mode

for TV Viewing” section.

Press DISPLAY to display the broadcast signal

being received.

MTS Stereo broadcast:

Multi-channel Television Sound Stereo broadcast. Select

STEREO audio mode.
• If stereo broadcast is weak and the display flickers, select

MONO audio mode for possible improvement.

SAP broadcast:

Secondary Audio Program (sub language).
Select SAP audio mode for the sub language.

Press AUDIO to select the desired audio mode as

described above. (Arrow shows selection.)

• Each press of AUDIO will change the audio mode as shown below.
• “SAP” is selected with first press of AUDIO.

MONO broadcast:

Normal monaural sound broadcast.

< Example >

Equipped with

-TV Noise Reduction for true MTS

reproduction.

-TV Noise Reduction is required for good

stereo separation and audio fidelity.

is a registered

trademark, and is licensed by

Technology Licensing.

MTS Stereo and SAP broadcast:

Multi-channel Television Sound Stereo (main language) and

Secondary Audio Program (sub language) broadcasts are being

received simultaneously. Select the STEREO or SAP audio

mode.

DISPLAY

AUDIO

Receivable Broadcast Types

Audio Mode for TV Viewing

12:00AM

CH 08

STEREO
SAP
MONO

12:00AM

CH 08

STEREO
SAP
MONO

12:00AM

CH 08

STEREO
SAP
MONO

12:00AM

CH 08

STEREO
SAP
MONO

12:00AM

CH 08

STEREO
SAP
MONO

12:00AM

CH 08

STEREO
SAP
MONO

12:00AM

CH 08

STEREO
SAP
MONO

Summary of Contents for AG520VDH - COMB. DVD/VCR/TV

























































Search results

Summary of Contents for AG520VDH - COMB. DVD/VCR/TV

Reviews:

Related manuals for AG520VDH - COMB. DVD/VCR/TV

Brands by name

Popular brands

Panasonic AG520VDH - COMB. DVD/VCR/TV, Operating Instructions Manual

Search results

Summary of Contents for AG520VDH - COMB. DVD/VCR/TV

Reviews:

Related manuals for AG520VDH - COMB. DVD/VCR/TV

Brands by name

Popular brands