Panasonic AG-MSU10 Operating Instructions Manual Download Page 39

Page: 39 / 52

Setup

THUMBNAIL

Menu

Setting

ALL CLIP

Shows all clips

SELECTED CLIPS

Shows only clips selected using the SET button

MARKED CLIPS

Shows only clips to which shot marks have been attached

TEXT MEMO CLIPS

Shows only clips with text memo data.

SETUP

Switches indicator and time indications.
(For details, refer to the submenu description below.)

Submenu

INDICATOR

Switches thumbnail display indicators and data settings.

ALL HIDE

: Hides all indicators. Selecting ALL HIDE disables selection

of other items.

MARKER

: Shows the shot mark indicator.

TEXT MEMO

: Shows the text memo indicator.

WIDE

: Shows the wide indicator.

PROXY

: Shows the proxy indicator.

DATA DISPLAY

Switches the type of time indication.

: Time code

: User bits

TIME

: Time of recording

DATE

: Date of recording

DATE TIME

: Date and time of recording

CLIP NAME

: Clip name

USER CLIP NAME

: User clip name (up to the first 15 characters)

OPERATION

Menu

Setting

DELETE

Deletes selected clips.

COPY(P2)

Copies clips on a storage device to a P2 card.

COPY(INT./USB/eSATA)

Copies clips on a P2 card to a storage device (INT./USB/eSATA).

FORMAT(P2)

Formats a P2 Card.

FORMAT(INT./USB/eSATA)

Format the storage device (INT./USB/eSATA) using TYPE S or FAT, or
delete all the data on the storage device.

CHANGE PARTITION NAME

Changes names of partitions on a storage device formatted using the
TYPE S format.

DELETE LAST PARTITION

Deletes the last partition on a storage device formatted using the TYPE
S format.

DELETE FOLDER

Deletes folders on a storage device formatted using FAT.

Summary of Contents for AG-MSU10





















































Search results

Summary of Contents for AG-MSU10

Reviews:

Related manuals for AG-MSU10

Brands by name

Popular brands

Panasonic AG-MSU10, Operating Instructions Manual

Search results

Summary of Contents for AG-MSU10

Reviews:

Related manuals for AG-MSU10

Brands by name

Popular brands