Panasonic AG-HPD24P Operating Instructions Manual Download

Page: 84 / 98

For Long and Trouble-Free Operation: Warning and Error Messages

• The OSD displays messages when warnings or errors occur.

Detailed Warning and Error Information

Display of information on operational warnings

Monitor display

Description

Deck operation

CANNOT REC

Displayed when data cannot be recorded on a P2 card.

[Meaning]

• The card is write protected.

• No more free space on the card.

• You are trying to record on a card that cannot be used.

• Card status changed during recording.

• VFR recording started but no active frame data was input.

• Recording was attempted when the unit was BUSY.

STOP

CANNOT LOOP REC

Displayed when ON is selected in menu SETUP - BASIC - LOOP REC and the P2 cards are

not available for recording.

[Meaning]

• The card is write protected.

• No more free space on the card.

• You are trying to record on a card that cannot be used.

• Card status changed during recording.

• Recording was attempted when the unit was BUSY.

STOP

CANNOT PLAY

Displayed when playback was interrupted due to a clip error or other factor.

[Meaning]

• Playback was attempted on card without any clips.

• Playback was attempted on a card not available for playback.

• Other causes that prevent playback or stops playback.

• Playback was attempted when the unit was BUSY.

STOP

TEXT MEMO INVALID

Displayed when a text memo cannot be recorded (for example, 100 or more text memos

have been recorded).

Operation

continues

INT SG

Displayed for the first 2 seconds when INT SG is selected in menu SETUP - VIDEO - INPUT

SEL or in menu SETUP - AUDIO - INPUT SEL and the REC

button is pressed to engage

EE mode.

Operation

continues

NO INPUT

Displayed for the first two seconds when the REC

button is pressed to enter EE mode

and INPUT SEL is set to a connector with no input except for analog audio signals.

Operation

continues

TEXT MEMO

Displayed for two seconds when a text memo is added.

Operation

continues

MARK ON / MARK OFF

Displayed for two seconds when a shot mark is added or deleted.

Operation

continues

SLOT SEL INVALID

Displayed when the SLOT SEL button (when assigned to a USER button) was pressed when

it is not possible to switch P2 card recording slot.

Operation

continues

BUSY

Displayed while clip information is being read or when clip configuration has changed. No

operations can be performed while BUSY is on the screen.

[Meaning]

• A card has been inserted or removed.

• Updating is in progress

• Recording post processing is in progress

• Other causes

Operation

continues

REF ERROR

Displayed when the REF IN connector signal differs from the system frequency or is not

synchronized with SDI input signals, or in other situations when synchronization with the

reference signal is not possible. The unit will not operate normally when this warning is

displayed. Check connections and input signals.

Operation

continues

Summary of Contents for AG-HPD24P



































































































Search results

Summary of Contents for AG-HPD24P

Reviews:

Related manuals for AG-HPD24P

Brands by name

Popular brands

Panasonic AG-HPD24P, Operating Instructions Manual

Search results

Summary of Contents for AG-HPD24P

Reviews:

Related manuals for AG-HPD24P

Brands by name

Popular brands