35
Chapter 1: Operations in
AVCHD mode
Video data recorded in CAMERA mode is referred to as a clip, while still image data recorded in PHOTO
mode is referred to as a photo. When you enter PB mode, thumbnail images of clips or photos appear on
the viewfinder (The thumbnails may take longer to display with higher quantities of clips and photos.).
You can perform the following operations using the thumbnail screen.
Play and delete clips or photos
Format SD Memory Card
Add or delete shot mark
During clip playback
Clip thumbnails and the operating menu are displayed in the thumbnail screen.
9 thumbnails are displayed in a single screen. When more clips than that are recorded, use PAGE/ADV –/+
button to advance to other pages.
In addition, you can press the DISP/MODE CHK button to display information about the clip currently
selected with the yellow cursor.
6
1
8 9 10
11
3
4
5
2
13
14
15
16
17
18
7
8 9 1011
12
2
Thumbnail display
Clip information display
•
•
•
1 Thumbnail mode display
Displays the selected thumbnail mode.
2 Remaining battery display
Displays the remaining battery capacity.
3 Video/photo selection
Selects whether to display the clip or photo
thumbnail screen.
4 Thumbnail mode selection
Selects the thumbnail mode. (Page 38)
5 Playback format selection
Selects the playback format. (Page 41)
6 Scrollbar
Displayed when there is a large quantity of
clips. Allows you to scroll the screen.
7 Clip number
Displays in the order recorded. Clips with
invalid recording formats and other clips that
cannot be played back will be displayed in a
red frame. To play back clips displayed in red
frames, change the playback format.
8 Shot mark
Indicates that a shot mark has been added.
(Page 49)
9 Interval recording mark
Indicates clips that were recorded with interval
recording. (Page 13)
10 Clip protect mark
Indicates protected clips. (Page 45)
11 Resume playback mark
Indicates clips that will resume playback from a
previous point. (Page 49)
12 Thumbnails
A thumbnail of the clip.
13 START TC
Displays the time code value at start of
recording.
14 START UB
Displays the user information value at start of
recording.
15 DATE/TIME
Displays the date of recording and time at start
of recording.
16 TIME ZONE
Displays the time zone.
Clip and photo operations
(Continued on the next page)
