6
Chapter 1: Operations in
AVCHD mode
2
Select the TC PRESET item in the setting
menu RECORD SETUP screen, and then
press the ENTER button.
Menu operation (Page 40 of Vol.1)
Operations may also be performed
using buttons on the remote control that
correspond to those on the camera. For
details, see “Description of parts (Remote
control)”. (Page 3 of Vol.1)
3
Select YES and press the ENTER button.
4
Using the cursor button, select the item you
want to set with the left or right button, and
set the numerical value with the up or down
button.
You can reset the time code to zero by pressing
RESET button.
Camera
AUDIO LEVEL
CH1
CH2
AUDIO SELECT
AUDIO IN
CH1
AUTO
MAN
FRONT
REAR
CH2
PHOTO MCR
DV
AVCHD
AUDIO SELECT
COUNTER
RESET/ TC SET
AUDIO IN
CH1
AUTO
MAN
FRONT
REAR
CH2
AUTO
MANUAL
•
•
Recharging the built-in battery
The camera’s internal battery saves the date and
time.
When SET DATE AND TIME is displayed even
when the date and time are set, it means that the
charge of the internal battery is depleted. Do the
following to recharge it.
Reset the date and time when fully recharged.
1
Connect the AC adaptor. (Page 26 of Vol.1)
Leave the POWER switch at OFF.
2
Leave the camera-recorder like this for
about 4 hours.
The internal battery charges during this time.
Check the time code and menu operations
after recharging.
If the date and time are not memorized after
recharging, the internal battery requires changing.
Please consult the place of purchase.
Setting the time code
In the setup menus, RECORD SETUP screen, set
the following time code related items.
(Pages 103, 104)
TC MODE
TCG
TC PRESET
Specifying the time code
Set TC PRESET so you can record a value of your
choice as the initial setting for the time code to be
used at the start of recording.
1
Set the POWER switch to ON.
(Page 30 of Vol.1)
•
•
•
•
•
•
Charging the built-in battery/Setting the time code
