Panasonic AG-HMC41EJ, Operating Instructions Manual

Page: 89 / 124

89
7 Remaining battery capacity display
When using Panasonic-manufactured batteries
compatible with this product, the remaining
battery capacity is displayed (“m” indicates
minutes).
Time remaining will be displayed after a brief
pause.
The battery display will change
→ → → →
as battery capacity decreases. will be
displayed in red when less than 3 minutes
are remaining, and
will flash when the
battery is empty.
The remaining battery capacity display is
a guideline and may change according to
usage conditions.
Not displayed when using AC adaptor.
8 Media capacity display
CAMERA mode:
Displays the remaining recording time for the
frame rate set with the REC FORMAT item in
the setting menu RECORD SETUP screen.
PHOTO mode:
Displays the number of photos that can
recorded under the current quality setting
for the QUALITY item in the setting menu
PICTURE screen.
•
•
•
•
•
9 Media information display
Displays basic information about inserted SD
Memory Card.
: (White) Playback possible
(Green) Recognizing card
: No card inserted
10 Metadata mark
Displayed when the META DATA REC item in
the setting menu RECORD SETUP screen is
set to ON. (Page 58)
11 Quality display
12 Self-timer display
Displayed when the SELF TIMER item in the
setting menu PICTURE screen is set.
13 Recording pixel display
14 Recording format display (Page 103)
15 Frame rate display
Displays recording frame rate.
Not displayed when set to 1080/50i.
16 Marker luminance display
2
When markers are displayed, the brightness
level around the center of the screen is
indicated as 0% to 99%. “99% ↑ ” appears if the
percentage is over 99.
Marker display:
During shooting, pressing the ZEBRA button
once or twice will display the marker.
17 display
The shutter speed is displayed here.
18 Microphone level automatic control display
Appears when in the setup menus, RECORD
SETUP screen, MIC ALC, you have selected
“ON”.
19 Wind noise reduction display
Displayed when the WIND CUT item in the
setting menu RECORD SETUP screen is set
to ON.
20 Focus bar display
1
Displayed when the FOCUS ASSIST SW item
in the setting menu SW&DISP SETUP screen
is set to BAR.
21 Function key display (Page 98)
1 Will not be output to external devices.
2 Will not be displayed when the face detection function is set to ON in the auto mode, unless FACE
FRAMING is set to OFF.
(Continued on the next page)
USO
RESTRITO