background image

2

indicates safety information.

Read this first!

WARNING:

WARNING:

TO REDUCE THE RISK OF FIRE OR 
SHOCK HAZARD, DO NOT EXPOSE THIS 
EQUIPMENT TO RAIN OR MOISTURE.

WARNING:

Always keep memory cards (optional 
accessory) or accessories (coin battery, PIN-
BNC conversion plugs, ferrite cores, cable 
ties, XLR connector cap) out of the reach of 
babies and small children.

CAUTION:

Do not remove panel covers by unscrewing 
them.
To reduce the risk of electric shock, do not 
remove the covers. No user serviceable parts 
inside.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK 
HAZARD AND ANNOYING INTERFERENCE, 
USE THE RECOMMENDED ACCESSORIES 
ONLY.

CAUTION:

CAUTION:

Do not lift the unit by its handle while the 
tripod is attached. When the tripod is attached, 
its weight will also affect the unit’s handle, 
possibly causing the handle to break and 
hurting the user. To carry the unit while the 
tripod is attached, take hold of the tripod.

CAUTION:

Do not leave the battery in an automobile 
exposed to direct sunlight for a long period 
of time with doors and windows closed.
Do not disassemble the battery or dispose 
of it in fire.

For Battery Pack

Use specified charger.
Replace only with same or specified type.

For Battery of Remote Controller

Replace battery with part No. CR2025 only.
Do not recharge the battery.




CAUTION:

THE AC RECEPTACLE (MAINS SOCKET 
OUTLET) SHALL BE INSTALLED NEAR 
THE EQUIPMENT AND SHALL BE EASILY 
ACCESSIBLE.
TO COMPLETELY DISCONNECT THIS 
EQUIPMENT FROM THE AC MAINS, 
DISCONNECT THE POWER CORD PLUG 
FROM THE AC RECEPTACLE.

CAUTION:

Do not jar, swing, or shake the unit by its 
handle while the conversion lens or another 
accessory is attached.
Due to the added weight of the conversion 
lens, any strong jolt to the handle may 
damage the unit or result in personal injury.

CAUTION:

EXCESSIVE SOUND PRESSURE FROM 
EARPHONES AND HEADPHONES CAN 
CAUSE HEARING LOSS.

CAUTION:

Do not leave the unit in direct contact with the 
skin for long periods of time when in use.
Low temperature burn injuries may be suffered 
if the high temperature parts of this unit are 
in direct contact with the skin for long periods 
of time.  
When using the equipment for long periods of 
time, make use of the tripod.

USO 

RESTRITO

Summary of Contents for AG-HMC41EJ





























































































































Reviews: