Editing
73
(Continued on the next page)
TV/Monitor
Only the output signals from the camera are shown.
COMPONENT
OUT
HDMI cable
(optional)
Component video cable (included)
Video cable
(optional)
Audio cable (optional)
White: CH1 (left channel) sound
Red: CH2 (right channel) sound
Connect these
cables to the
terminals on
the television.
TV/Monitor
Ferrite core
(included)
Ferrite core
(included)
When outputting video and audio signals from the camera to an external device, connect to the
input terminals of the external device.
When connecting the camera with a TV/monitor using an HDMI cable,
attach the two ferrite cores (included) to the HDMI cable, one at a position
about 5 cm from the TV/monitor terminal and the other at a position about
5 cm from the camera terminal. After attaching the cable as shown in the
diagram on the right, close the terminal so that it clicks and locks into place.
•
If the ferrite core moves along the cable and cannot be fixed in place,
please attach binders either side of the ferrite core to ensure that it remains
fixed.
Adjust the length of binders by cutting with scissors, etc.
•
Always take sufficient care when handling the ferrite core, as it can be easily damaged when dropped or
subjected to other impact.
It is recommended that you use Panasonic’s HDMI cable.
HDMI output will take priority if both HDMI cable and VIDEO OUT cable are connected at the same time.
Simultaneous output is not possible.
This product is not compatible with VIERA Link.
Signals can be output from both the HDMI OUT terminal and the COMPONENT OUT terminal
simultaneously by setting the HDMI OUT SEL item on the AV OUT SETUP screen to FIX.
When connecting the camera to another device using the component video cable, if the terminal on the
device to which it is to be connected is a BNC type, use the pin-BNC conversion plug provided.
•
•
•
•
•
•
■
