88
Setup menu list (continued)
SW MODE screen
Item
Display
mode
Description of settings
MID GAIN
(Camera)
Sets the gain value assigned to the M position of the GAIN switch.
0dB, 3dB, 6dB, 9dB, 12dB
HIGH GAIN
(Camera)
Sets the gain value assigned to the H position of the GAIN switch.
0dB, 3dB, 6dB, 9dB, 12dB
ATW
(Camera)
Sets the operation of the ATW (Auto Tracking White) function assigned to the
WHITE BAL switch. When the ATW function is allocated to the AUTO/MANUAL
switch or USER button, the operation remains effective.
Ach:
Activates the ATW function when the WHITE BAL switch is set to A.
Bch:
Activates the ATW function when the WHITE BAL switch is set to B.
PRST:
Activates the ATW function when the WHITE BAL switch is set to PRST.
OFF:
Deactivates the ATW function.
HANDLE
ZOOM
(Camera)
Sets the zoom speed assigned to each setting position of the HANDLE ZOOM
switch.
L/OFF/H:
Sets LOW (low speed)/OFF/HIGH (high speed) to the 1/2/3 position.
(Zoom is disabled when set to OFF.)
L/M/H:
Sets LOW (low speed)/MID (medium speed)/HIGH (high speed) to the
1/2/3 position.
L/OFF/M:
Sets LOW (low speed)/OFF/MID (medium speed) to the 1/2/3 position.
(Zoom is disabled when set to OFF.)
IRIS DIAL
(Camera)
Sets the rotation direction and the aperture control of the IRIS dial. (In MANUAL
IRIS mode)
DOWN OPEN:
The iris opens when the IRIS dial is turned downward.
UP OPEN:
The iris opens when the IRIS dial is turned upward.
USER1
(Camera)
(PB)
Selects the function assigned to the USER1 button.
SPOTLIGHT:
Switches auto iris control for the spotlight on or off.
BACKLIGHT:
Auto iris control for the backlight compensation. (Page 43)
BLACKFADE:
WHITEFADE:
ATW:
Switches the ATW function on or off.
ATW LOCK:
Fixes the white balance value when the button is pressed during
ATW. Press again to perform ATW.
GAIN:18dB:
Press the button to set the gain value to 18 dB. This setting takes effect with the
50i and 50P recording formats only. It is not valid when the slow shutter mode
(1/12) is established.
When the gain value is switched to 18 dB or switched from 18 dB to another
value, the image can be disordered for a moment.
If the unit is being used in the MANUAL mode or AUTO mode, set the AGC item
on the AUTO SW screen of the setting menu to OFF to use this function.
D.ZOOM:
Changes the ratio of the DIGITAL ZOOM function.
Each press of the button changes the ratio in the following order:
OFF (x1)
→
x2
→
x5
→
x10
→
INDEX:
SHOT MARK:
LAST CLIP:
Deletes the last recorded clip. (Page 45)
After recording, clips cannot be deleted by switching to PB or PC mode, by
changing the recording format, or by turning the camera off.
•
•
•
indicates the factory setting.
