Panasonic AG-DV2500P, Service Manual

Page: 132 / 306

3-5
2 ME recording
current
adjustment • EE
• ADJUST
MENU, 105.
ME REC
CURRENT
(4) Measure TP6 (SPA) by triggering TP5 (HID) and
confirm that the values a and b are within the
specified ranges.
(5) Press the [PLAY] button a few times to dis-
play the adjustment data in the "DATA:" field.
(The DATA value should not be 00000000 or
FFFFFFFF.)
(6) Press the [SET] button to store the adjustment
data.
*
Monitor display
-
[PLAY] and [STOP]
buttons
+
SET DATA = 115
Measuring Measuring point (
*
)
No. Item instruments & Mode Adjustment parts (
-
) Adjustment procedure
Input signals Adjustment level (
+
)
(1) Select ADJUST MENU No. 105, "ME REC
CURRENT".
(2) Check the set data so that the value is “115”
(Recording current is approx. 360 mVp-p) . If not,
adjust the value to “115”
(3) Press the [SET] button to store the adjustment
data.
Fig. 3.2.1(2)
– – – A D J U S T M E N U – – –
1 0 0 . P B S W P O I N T
!
V R D A T A : - - - -
C T L D A T A : 1 2 0
S E T D A T A : 1 2 0
D A T A : 0 0 0 0 0 0 0 0 Press the [PLAY] button a few
times to display data.
After displaying the data, press
the [SET] button to complete the
adjustment.
– – – A D J U S T M E N U – – –
1 0 5 . M E R E C C U R R E N T
V R D A T A : 1 1 5
C T L D A T A : 1 1 5
S E T D A T A : 1 1 5
C H 1 6 5 5 3 5
C H 2 6 5 5 3 5
Fig. 3.2.2
NOTE:
Make sure that the data value is displayed
before pressing the [SET] button. If this ad-
justment is completed before the data value
is displayed the adjustment value will not
be put into the memory.