Chapter 5 Shooting
—
Special recording function
- 133 -
IR recording
A night time shooting using the IR light can be performed.
∫
Assigning [IR REC] to the USER button
1
Select the [CAMERA] menu
→
[USER SW]
→
[USER1] to [USER12]
→
[IR REC].
Set so enable/disable of the IR recording can be switched with a USER button.
∫
Performing IR recording
1
Press the USER button to which [IR REC] is assigned or touch the USER button icon.
The unit will enter the IR recording mode.
≥
The following happens in the IR recording mode:
j
[IR] is displayed on the camera image screen.
j
Iris is automatically adjusted.
2
Press the REC button.
IR recording is started.
@
NOTE
0
In the following case, this cannot be set.
j
When using the face detection/tracking AE&AF function
0
This can also be set with the [CAMERA] menu
→
[SW MODE]
→
[IR REC].
0
It is recommended to use a tripod.
0
It takes longer to focus with Auto Focus in dark locations.
0
You can record a clear image by positioning the center area of the screen over the subject.
0
Focus values may not be displayed correctly in IR recording mode.
0
It is also possible to change the color in which images are recorded in [IR REC COLOR] (
Recording the proxy data [CX10]
With P2 recording on this unit, apart from the normal recording of video, it is also possible to simultaneously record AVC-G6 format as proxy data.
1
Select the [SYSTEM] menu
→
[FILE FORMAT]
→
[P2].
[REC FORMAT] needs to be set to something other than AVC-G12.
2
Select the [RECORDING] menu
→
[PROXY REC]
→
[ON].
[PXY] is displayed next to the recording format in the camera image screen. This indicates that the recording of the proxy data is set.
3
Press the REC button.
Proxy data is recorded at the same time that normal video is recorded.
≥
The proxy data is recorded to the memory card in the same card slot used for normal recording. It is not possible to record only proxy data.
≥
[P] is displayed in the thumbnail screen on the clip with a proxy data recorded.
≥
The recorded proxy data cannot be played back with this unit. The data can be played back on a P2 Viewer Plus. For information about P2 Viewer Plus, refer
to the support page on the following website.
https://pro-av.panasonic.net/en/products/ag-cx10/index.html
@
NOTE
0
The resolution of the proxy data is the same as the data recorded normally.
0
The file format is MOV format that is also appropriate to a nonlinear editing. For details of format, refer to “Specifications” (
203).
0
When [FILE FORMAT] is set to anything other than [P2], the proxy data cannot be recorded.
0
When [REC FORMAT] is set to AVC-G12, the proxy data cannot be recorded.
0
For the recording restriction during the proxy recording, refer to “Recording function that cannot be used simultaneously” (
198). Also, the recording
function of the proxy data cannot be simultaneously used with the streaming function (
184).
0
It is not possible to restore proxy data. When a clip with proxy data is restored, only the data recorded normally is restored. The proxy data is erased.
