- 47 -
∫
Using an external microphone or audio equipment
≥
Set [MIC SETUP] to [2ch]. (
l
45
)
1
Connect an external microphone or audio
equipment to AUDIO INPUT1, 2 terminals (XLR
3 pin). (
l
9
)
2
Use INPUT1, 2 (LINE/MIC) switches to switch
the connected audio input signal.
LINE
: audio equipment is connected
Input level is 0 dBu.
MIC
: an external microphone is connected
Input level is -50 dBu.
≥
When [EXT. MIC GAIN1] or [EXT. MIC GAIN2] is set to
[-60dB], the input level is set to -60 dBu. (
l
94
)
3
(When using the phantom microphone (which requires
+48 V power supply))
Set the INPUT1, 2 (+48V) switches to ON.
ON
: +48 V power supply to audio input terminals 1, 2 (XLR 3 pin).
OFF
: No power supply for audio input terminals 1, 2 (XLR 3 pin).
4
Use the CH1 switch to select the input signal to be recorded to audio channel
1.
INT(L)
: Audio from the built-in microphone L (left) ch is recorded to audio channel 1.
INPUT1
: Audio from a device connected to audio input terminal 1 (XLR 3 pin) is recorded to channel 1.
INPUT2
: Audio from a device connected to audio input terminal 2 (XLR 3 pin) is recorded to channel 1.
5
Use the CH2 switch to select the input signal to be recorded to audio channel
2.
INT(R)
: Audio from the built-in microphone R (right) ch is recorded to audio channel 2.
INPUT2
: Audio from a device connected to audio input terminal 2 (XLR 3 pin) is recorded to channel 2.
A
AUDIO INPUT2
terminal (XLR 3 pin)
B
AUDIO INPUT1
terminal (XLR 3 pin)
AG-AC90-VQT4M99_mst.book 47 ページ ２０１２年９月２５日 火曜日 午後１２時６分
