Panasonic AG-AC90EJ Page 103 Operating Instructions Manual Download

Page: 103 / 119

- 103 -

The menu settings or [CUSTOMIZE SCENE] back to the default setting. (

)

≥

Settings for [REC FORMAT], [MEDIA SELECT], [CLOCK SET] and [LANGUAGE] will not be
changed.

The version of the firmware of this device is displayed.

The firmware of this device is updated. (

111

)

The accumulated operating time of this device is displayed.

Selects the sound heard through the headphones.

≥

When this unit is connected to a TV using the HDMI cable (optional), audio at the time of the
[RECORDING] setting is output even if this setting is set to [LIVE].

You can select the language on the screen display and the menu screen.

[INITIAL SET]

[ALL]:

This is for initializing all menus.

[SCENE]:

This is for initializing the setting of customize scene.

[SYSTEM INFO]

[UPDATE]

[OPERATION TIME]

[H/PHONE MODE]

[LIVE]:

The sound which has been input from the microphone is output as is.
This setting is selected when delays in the sound are annoying.

[RECORDING]:

The sound in the status which is to be recorded (the sound synchronized
with the images) is output.

[LANGUAGE]

AG-AC90-VQT4M99_mst.book 103 ページ２０１２年９月２５日　火曜日　午後１２時６分

Summary of Contents for AG-AC90EJ
























































































































Search results

Summary of Contents for AG-AC90EJ

Reviews:

Related manuals for AG-AC90EJ

Brands by name

Popular brands

Panasonic AG-AC90EJ, Operating Instructions Manual

Search results

Summary of Contents for AG-AC90EJ

Reviews:

Related manuals for AG-AC90EJ

Brands by name

Popular brands