Panasonic AG-AC30PB Operating Instructions Manual Download Page 64

Page: 64 / 154

- 64 -

You can apply a variety of effects to the subject you touch.

∫

Setting an Area Mode effect

You can select the following menu items to set an effect to be applied when you touch the subject.

∫

Using Area Mode

≥

Register “Area Mode” to a USER button. (

)

≥

Switch to Manual Mode. (

)

Press the applicable USER button or touch the applicable USER button icon
on the recording screen.

≥

Area Mode will be enabled and

will be displayed.

Touch the recording screen.

≥

The area frame will be displayed on the part you have
touched. The effect of the selected menu item will be
applied.

To turn off Area Mode

(With a USER button)

Press the USER button

(With a USER button icon)

Touch and hold the recording screen to
display operation icons.

Touch the USER button icon.

To change the size of the area frame

You can rotate the jog dial to change the size of the
area frame.

≥

The area frame is available in three sizes.

Area Mode

: [SW SETUP]

[AREA MODE]

desired setting

[INH]:

Does not apply any effects of Area Mode.

[FOCUS]:

Optimizes the focus automatically for the subject you touch

[IRIS]:

Optimizes the iris automatically for the subject you touch.

[Y GET]:

Displays the luminance level of the subject you touch.

[FOCUS/IRIS]:

Optimizes the focus and iris automatically for the subject you touch.

[FOCUS/Y GET]:

Optimizes the focus automatically for the subject you touch and
displays the luminance level of the subject.



Area frame

R68S3_PJPB.book 64 ページ２０１６年５月１８日　水曜日　午後１０時３２分

Summary of Contents for AG-AC30PB



























































































































































Search results

Summary of Contents for AG-AC30PB

Reviews:

Related manuals for AG-AC30PB

Brands by name

Popular brands

Panasonic AG-AC30PB, Operating Instructions Manual

Search results

Summary of Contents for AG-AC30PB

Reviews:

Related manuals for AG-AC30PB

Brands by name

Popular brands