Panasonic AG-AC30PB Operating Instructions Manual Download

Page: 137 / 154

- 137 -

During USB Device mode

Display

Description

Behavior and cause

DISCONNECT USB
CABLE.

An error has occurred while
accessing the SD card, or the
OS is not supported.

≥

Check the SD card.

≥

Check to see if the OS is
supported.

During USB Host mode

Display

Description

Behavior and cause

CANNOT CHECK
CONNECTED DEVICE.
DISCONNECT THE USB
CABLE FROM THIS UNIT.

This is displayed when the
device is connected to this unit
with a product such as a USB
hub.

≥

Do not connect the devices with
a product such as a USB hub.
Connect to this unit directly.

FORMATTING FAILED.

The external media device
cannot be formatted.

≥

Change the connected external
media device.

During copying between SD cards or copying to an external media device

Display

Description

Behavior and cause

PLEASE CHECK THE
EXTERNAL MEDIA.

Copying cannot be performed due
to, for example, a problem with the
copy destination media device.

≥

Check the copy destination
media device.

THIS SCENE CANNOT BE
COPIED.
Cannot copy: contains
recordings from other
devices.

This is displayed when one or
more of the scenes you are
trying to copy cannot be played
back on this unit.

≥

Copy scenes except for the
ones that cannot be copied.

COPY FAILED. PLEASE
CHECK THE CARD.

An error has occurred while
accessing the SD card.

≥

Check the SD card.

Cancel card lock to write
information.

The write-protect switch of the
copy destination SD card is
locked.

≥

Unlock the write-protect switch
of the SD card.

R68S3_PJPB.book 137 ページ２０１６年５月１８日　水曜日　午後１０時３２分

Summary of Contents for AG-AC30PB



























































































































































Search results

Summary of Contents for AG-AC30PB

Reviews:

Related manuals for AG-AC30PB

Brands by name

Popular brands

Panasonic AG-AC30PB, Operating Instructions Manual

Search results

Summary of Contents for AG-AC30PB

Reviews:

Related manuals for AG-AC30PB

Brands by name

Popular brands