Panasonic AG-AC30PB Operating Instructions Manual Download

Page: 19 / 154

- 19 -

Inserting/removing an SD card

Caution:
Check that the access lamp has gone off.

Open the SD card slot cover and
insert (remove) the SD card into
(from) the card slot

≥

One SD card can be inserted into each of the
card slot 1 and the card slot 2.

≥

Face the terminal side

in the direction

shown in the illustration and press it straight
in as far as it will go.

≥

Press the center of the SD card and then pull
it straight out.

Securely close the SD card slot
cover.

≥

Do not touch the terminals on the back of the
SD card.

≥

Do not apply strong shocks, bend, or drop the
SD card.

≥

Electrical noise, static electricity or the failure
of this unit or the SD card may damage or
erase the data stored on the SD card.

≥

When the card access lamp is lit, do not:

Remove the SD card

Turn the unit off

Insert and remove the USB Cable

Expose the unit to vibrations or shock

Performing the above while the lamp is on
may result in damage to data/SD card or this
unit.

≥

Do not expose the terminals of the SD card to
water, dirt or dust.

≥

Do not place SD cards in the following areas:

In direct sunlight

In very dusty or humid areas

Near a heater

Locations susceptible to significant
difference in temperature (condensation
can occur.)

Where static electricity or electromagnetic
waves occur

≥

To protect SD cards, return them to their
cases when you are not using them.

≥

About disposing of or giving away the SD
card. (

148

)

When using an SD card for the first time, it is necessary to format the SD card. (

) When the

SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be
restored.







Access lamp

≥

When this unit is accessing the SD card,
the access lamp lights up.

R68S3_PJPB.book 19 ページ２０１６年５月１８日　水曜日　午後１０時３２分

Summary of Contents for AG-AC30PB



























































































































































Search results

Summary of Contents for AG-AC30PB

Reviews:

Related manuals for AG-AC30PB

Brands by name

Popular brands

Panasonic AG-AC30PB, Operating Instructions Manual

Search results

Summary of Contents for AG-AC30PB

Reviews:

Related manuals for AG-AC30PB

Brands by name

Popular brands