Panasonic AFPX-C14P User Manual Download Page 87

Page: 87 / 544

5.5.3

Power Supply for Expansion FP0 Adapter

Power supply wiring for the unit

Use the power supply cable (Part No.:AFP0581) that comes with the unit to connect the power supply.

Brown: 24V DC

Blue: 0V

Green: Function earth (FE)

Power supply wire

To minimize adverse effects from noise, twist the brown and blue wires of the power supply cable.

Power supply from the servicing power supply for the input of the FP-X control unit

•

To protect the system against erroneous voltage from the power supply line, use an insulated power

supply with an internal protective circuit (electric cable that reinforced insulation or double insulation

has been made).

•

The regulator on the unit is a non-insulated type.

•

To turn the power supplies on simultaneously, supply the power for the expansion FP0 adapter from

the servicing power supply for the input of the FP-X control unit.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for AFPX-C14P

































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AFPX-C14P

Reviews:

Related manuals for AFPX-C14P

Brands by name

Popular brands

Panasonic AFPX-C14P, User Manual

Search results

Summary of Contents for AFPX-C14P

Reviews:

Related manuals for AFPX-C14P

Brands by name

Popular brands