Panasonic AFPX-C14P User Manual Download Page 77

Page: 77 / 544

5.2 Installation Using Expansion Cable

The FP-X expansion unit and the FP-X expansion FP0 adapter are connected to the control unit using

the exclusive expansion cable.

-The expansion cable (AFPX-EC08) is packaged with the expansion unit and expansion FP0 adapter.

(It can be purchased separately.) The expansion cables (AFPX-EC30 and AFPX-EC80) are sold

separately.

Note:

-The total length of the expansion cables should be within 160 cm.

-When using the expansion cable (AFPX-EC30 or EC80), keep it away from the devices and wirings

generating noises as much as possible.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for AFPX-C14P

































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AFPX-C14P

Reviews:

Related manuals for AFPX-C14P

Brands by name

Popular brands

Panasonic AFPX-C14P, User Manual

Search results

Summary of Contents for AFPX-C14P

Reviews:

Related manuals for AFPX-C14P

Brands by name

Popular brands