Panasonic AFPX-C14P User Manual Download Page 75

Page: 75 / 544

Installation space

•

Leave at least 50mm of space between the wiring ducts of the unit and other devices to allow heat

radiation and unit replacement.

•

Maintain at least 100mm of space between devices to avoid adverse affects from noise and heat when

installing a device or panel door to the front of the PLC unit.

•

Leave at least 100mm of space open from the front surface of the control unit in order to allow room for

programming tool connections and wiring.

5.1.2

stallation and Removal

Attachment to DIN rail and removal from DIN rail

Can be simply attached to DIN rail.

Procedure of installation method

(1) Fit the upper hook of the unit onto the DIN rail.

(2) Without moving the upper hook, press on the lower hook to fit the

unit into position.

Procedure of removal method

(1) Insert a slotted screwdriver into the DIN rail attachment lever.

(2) Pull the attachment lever downwards.

(3) Lift up the unit and remove it from the rail.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for AFPX-C14P

































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AFPX-C14P

Reviews:

Related manuals for AFPX-C14P

Brands by name

Popular brands

Panasonic AFPX-C14P, User Manual

Search results

Summary of Contents for AFPX-C14P

Reviews:

Related manuals for AFPX-C14P

Brands by name

Popular brands