Panasonic AF7CPS Series, User Manual

Page: 9 / 82

1.1 Communication Ports of CPU Unit
1-3
1.1.2 AFP7CCET1 Port Specifications

100BASE-TX / 10BASE-T connector (RJ45)
When an Ethernet (100BASE-TX, 10BASE-T) is being used, this connector is used to connect
the communication cassette and the hub, using a UTP cable.
Pin no. Signal name
1
TX+
2
TX-
3
RX+
4
Not used
5
Not used
6
RX-
7
Not used
8
Not used
 Functions of LED lamps
(1) LINK
Turns ON when the connection is connected between the communication cassette AFP7
CCET1 and external equipment.
(2) ACK
Flashes when some communication is in progress with a connected device (e.g.
sending/receiving a command or response).
1.1.3 Types of communication cassette
Communication ports
that can be allocated
Model no. Communication interface
COM.1 COM.2
User connection
●
AFP7CCET1
System connection
●
(Note) See 1.2 for the information of "User connection" or "System connection".
1.1.4 Configurator WD

The communication tool software “Configurator WD” is required to set Ethernet
communication for the AFP7CCET1

The Configurator WD can be downloaded from our website free of charge.
(Member registration is required. Free
of charge)