Panasonic AF7CPS Series, User Manual

Page: 29 / 82

4.2 Specified using Configurator WD
4-7
 Communication Settings
Parameters Description Default
Protocol Mode
Protocol Mode of Communication cassette AFP7 CCET1
Select TCP or UDP.
TCP
Action Mode
Action Mode of Communication cassette AFP7 CCET1
Select Client Mode or Server Mode.
Server Mode
Communication Mode
Communication Mode of Communication cassette AFP7
CCET1.
Select MEWTOCOL or General communication to match
the communication mode setting of FPWINGR7.
MEWTOCOL
Send type
Method for transmitting data to partner devices.
Select UNICAST or BROADCAST.
It is valid when selecting UDP in the communication
protocol.
UNICAST
Source Port
No.
Port number that AFP7 CCET1 opens.
Range
： 502 to 32767
9095
Server
Setting
(Note1)
Timeout
If AFP7 CCET not communicate with a destination device
during this setting time (seconds) in the state that
connection is established, connection will be cut.
Range
： 0 to 1800s
When 0 is set, the connection will not be cut.
15
Destination
IP Address
Specify IP address of destination
Set an IP address other than 0.0.0.0 and 255.255.255.255.
192.168.1.100
Destination
Port No.
Specify port number of destination
Range: 502 to 32767
9094
Source Port
No.
Source port number of a destination device
Range: 0, 1025 to 32767
When 0 is set, optional.
9095
Client
Setting
(Note2)
Timeout
If AFPX-COM5 not communicate with a destination device
during this setting time (seconds) in the state that
connection is established, connection will be cut.
Range: 0 to 1800 s
When 0 is set, the connection will not be cut.
15
(Note1): This parameter is valid, if "Server Mode" is selected.
(Note2): This parameter is valid, if "Client Mode" is selected.