Panasonic 44-Series User Manual Download Page 49

Page: 49 / 87

4. Answering Calls

DBS-32-755

Issued April 2000

• Press

PROG

and then replace the handset or press

ON/OFF

Unscreened Transfers

Note:

This feature requires system programming or a specific DBS

configuration, and may not be available. For information, see your system
administrator or DBS dealer.

In an unscreened transfer, you do not announce the call to the person
receiving the transfer. The call simply rings at the phone to which it is
transferred.

1. During a call, press

HOLD

2. Dial the extension number to which the call will be transferred.

3. Do one of the following (ask your dealer or system administrator which is

appropriate):

• Replace the handset or press

ON/OFF

, or

• Press

PROG

and then replace the handset or press

ON/OFF

Summary of Contents for 44-Series
























































































Search results

Summary of Contents for 44-Series

Reviews:

Related manuals for 44-Series

Brands by name

Popular brands

Panasonic 44-Series, User Manual

Search results

Summary of Contents for 44-Series

Reviews:

Related manuals for 44-Series

Brands by name

Popular brands