Panasonic 44-Series User Manual Download Page 48

Page: 48 / 87

4. Answering Calls

Issued April 2000

DBS-32-755

Picking Up Calls Parked by the Attendant

1. Pick up the handset or press

ON/OFF

2. Dial

3. Dial the appropriate system park number

(00-09)

Parking Calls from an Extension

1. Press

HOLD

during an outside call.

2. Dial

3. Replace the handset or press

ON/OFF

Picking Up Calls Parked by an Extension

1. Pick up the handset or press

ON/OFF

2. Dial

3. Dial the extension number of the person that parked the call.

Transferring Calls

Note:

If a transferred call is not answered within a specified time, the call

rings again at the extension that transferred it.

Screened Transfers

In a screened transfer, you announce the call before transferring it. This
allows you to give the recipient information about the call.

1. During a call, press

HOLD

2. Dial the extension number to which the call will be transferred.

3. When the recipient answers, announce the call.

4. Do one of the following (ask your dealer or system administrator which is

appropriate):

• Replace the handset or press

ON/OFF

Summary of Contents for 44-Series
























































































Search results

Summary of Contents for 44-Series

Reviews:

Related manuals for 44-Series

Brands by name

Popular brands

Panasonic 44-Series, User Manual

Search results

Summary of Contents for 44-Series

Reviews:

Related manuals for 44-Series

Brands by name

Popular brands