Useful Information
52
The handset will not
turn on.
L
Make sure that the batteries are installed correctly
(page 12).
L
Fully charge the batteries (page 13).
L
Clean the charge contacts and charge again
(page 13).
I have changed the
display language to a
language I cannot read.
L
Change the display language (page 14).
I cannot make or
receive calls.
L
The base unit AC adaptor or telephone line cord is not
connected. Check the connections.
L
If you are using a splitter to connect the unit, remove
the splitter and connect the unit to the wall socket
directly. If the unit operates properly, check the
splitter.
L
Disconnect the base unit from the telephone line and
connect the line to a known working telephone. If the
working telephone operates properly, contact our
service personnel to have the unit repaired. If the
working telephone does not operate properly, contact
your service provider/telephone company.
L
The dialling mode setting is incorrect. Set to
“
Tone
”
or
“
Pulse
”
as needed (page 15).
L
You dialled a call restricted number (page 31).
L
The key lock feature is turned on. Turn it off (page 20).
The unit does not ring.
L
The ringer volume is turned off. Adjust the ringer
volume (page 24, 29).
L
The night mode feature is turned on. Turn it off
(page 28).
The batteries should be
charging but the battery
icon does not change.
L
Clean the charge contacts and charge again
(page 13).
A busy tone is heard
when
{C}
is pressed.
L
The handset is too far from the base unit. Move closer
and try again.
L
Another handset is in use or the answering system is
being used. Wait and try again later.
Static is heard, sound
cuts in and out.
Interference from other
electrical units.
L
Place the handset and the base unit away from other
electrical appliances.
L
Move closer to the base unit.
L
Your unit is connected to a telephone line with DSL
service (page 55).
Problem
Cause & solution
TG8280FX(e).book Page 52 Tuesday, September 11, 2007 1:52 PM
