9
7.3. Handling generalities
The method of handling depends on the model of ECOi-W and its fi nal destination.
• Take care to avoid any rough handling or impacts when unloading and moving the appliance.
• Before hoisting into position, test lift to insure stability and balance. Avoid twisting or uneven lifting of the units.
• The units shall be carefully inspected before unit installation to make sure that no handling damage has occurred.
• All these sections have been inspected before leaving the factory. It is therefore important to insure that no bolts, screws or
other fi xing system are loosened or missing before the commissioning.
CAUTION
Never submit the metal work (panels, posts) of the ECOi-W to handling constraints, as only its base is
designed for that purpose.
CAUTION
Do not tilt the ECOi-W during handling, as it would be irrevocably damaged.
CAUTION
Never move the ECOi-W on rollers.
CAUTION
When handling the ECOi-W, beware not to damage the fi nned coil block. Protect it with cardboard or
particle panels.
7.3.1. Handling with a forklift
When a forklift is used to handle the 140/150/170/190/210 models, lift them only along their width.
Place a safety wedge between the unit base and the fork lift truck to avoid damaging the unit’s structure and casing.
Summary of Contents for 140
Page 48: ......
Page 49: ...APPENDIX ...