Appendix C. Programming with PanaView
120
DigitalFlow™ DF868 Multipurpose Ultrasonic Liquid Flowmeter Programming Manual (2-Channel)
C.6.2 Reading Transducer Signals
To read a
Signal
from the meter:
1.
Click on the
Read Signals
button. (If the meter is a multi-channel instrument, open the Channel drop-down menu
and click on the desired channel.) After a moment, the
Properties
window appears similar to Figure 28.
Figure 28: Active Signal Options
2. To select a different signal type, open the signal menu at the right (shown here with
Raw Upstream
highlighted)
and click on the desired signal.