Panametrics C-RL, Instruction Manual

Page: 11 / 56

Model C-RL Installation Guide 3
4 Installing the C-RL Transducers
Panametrics Measurement & Control offers the following transducer mounting fixtures to suit your applications
needs:
• V1 clamping fixture
• V4 clamping fixture
• V8 clamping fixture
• V12 clamping fixture
• PI clamping fixture
Figure 2 below and Figure 3 on page 4 show the V1, V4, V8, V12 and PI fixture assemblies. Each type of transducer and
fixture requires the installation of dampening material for acoustic isolation.
Complete the steps in the following sections to position and install the transducers, fixtures and dampening material.
Figure 2: The V12 Mounting Fixture