2
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5. WARNING:
Do not use this apparatus near water. To reduce the risk of fire or
electric shock, do not expose this apparatus to rain or moisture.
6.
Clean only with dry cloth.
7.
Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatuses that produce heat.
8.
Do not defeat the safety purpose of the polarized or grounding type plug. A
polarized plug has two blades, with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
Important Safety Instructions
9.
Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
10.
Only use attachments/accessories specified by the manufacturer.
11.
Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
12.
Where the power cord is used as the main disconnect device, the discon-
nect device shall remain readily accessible.
13.
This device must be connected to a main socket outlet with a protective
earthing connection.
Front Panel Features Overview
BANK 1
ETHERNET 1
SM3-PRO SYSTEM MANAGER
ETHERNET 2
BANK 2
UNSAFE
VOLTAGE
WIRING
FAULT
BlueBOLT
ACC 1
ACC 2
RESET
OUTLET
1
120V / 60Hz
GROUND
BANK 1
BANK 2
OUTLET
2
OUTLET
3
12A
1
2
3
4
5
6
Color/State Status
OFF
The wall-outlet is properly wired
RED
The wall outlet is reversed-wired or the ground is not connected
Color Status
OFF
Not connected to an active local area network (LAN)
Blue
Connected to an active LAN and is connected to the BlueBOLT
server/cloud
1. Outlet Bank 1 and 2 Buttons
The blue light above each outlet bank button indicates its present ON/OFF
state. Pressing the button for less than 5 seconds toggles the corresponding
Outlet Bank’s ON/OFF state. Pressing the button for 5 seconds or more initi-
ates a reboot sequence for the corresponding Outlet Bank.
2. Unsafe Voltage Indicator
If the line voltage is less than 95 Vac or greater than 134 Vac, the outlets will
shut off and this light will flash red. When the line voltage comes back to the
safe operating range, an outlet turn-on sequence is initiated 5 seconds later.
3. Wiring Fault Indicator
Illuminates red if the outlet wiring is reverse-wired or the ground is not con-
nected.
4. BlueBOLT Indicator
7
8
5. Accessory 1 and 2 Status LEDs
Indicates accessory port activity/status
6. Two Mini-plug Accessory Ports
Interface to accessory modules to extend the functionality of the unit. 1/8”
stereo phone jacks. Provides power (5VDC/400mA) and half-duplex serial
communicatuion to accessory modules.
7. Reset Button
Communication connectors reset / restore.
8. Ethernet 1 and 2 Connectors / 2-Port 10/100 BaseT Switch
Connect one port to an active local area network.
Connect the other port to an Ethernet-connected device (optional).
BANK 1
ETHERNET 1
SM3-PRO SYSTEM MANAGER
ETHERNET 2
BANK 2
UNSAFE
VOLTAGE
WIRING
FAULT
BlueBOLT
ACC 1
ACC 2
RESET
OUTLET
1
120V / 60Hz
GROUND
BANK 1
BANK 2
OUTLET
2
OUTLET
3
12A
Link LED: Illuminated
Green when connected
to an active LAN.
Activity LED: Flashes to
indicate that LAN con-
nection is active.