Panacom PA-7700, User Manual

Page: 7 / 24

Pg. 7
Wall Mount Installation
Please follow the next steps.
1. Rotate the handset hook one-half turn.
2. Remove the base plate from the back by
pressing down on the snap tabs located at
the top, and then lifting it off.
3. Plug the telephone line cords into the
phone jacks on the back of the unit; wrap
the extra line cord around the cord wrap on
the bottom of the base; and then thread the
other cords through the bottom of the base.
4. Plug the power supply adapter into the
9V AC jack on the back of the unit, and then
thread it through the bottom of the base.
5. Reverse the direction of the base plate and
replace it by putting the tabs into the slots on
the unit first, and then snapping the bottom
tabs into place.
6. Connect the telephone line cords to the
modular jacks on the wall.
7. Slip the mounting holes over the wall plate
posts and slide the unit down firmly into
place (wall plate not included).
8. Connect the AC power supply adapter to
an AC outlet.
9. Plug the handset cord into the handset and
into the unit, and then hang up the handset.
MEMORY DIALING
Each one of the 16 memory buttons on the
phone contains an upper and lower memory
location. This mean the phone maximum
memory storage is 32 phone numbers. The
lower memory is accessed by pressing the
Lower button on the Memory Directory
You can store numbers with the phone off-