Panacom PA-7700, User Manual

Page: 6 / 24

Pg. 6
backside of the base unit in LINE 1 and LINE 2.
Connect the curling cord into the handphone and to the left side of
the base unit.
Connect the AC power adaptor in the backside of the base unit and to
the power plug on the wall. Remember adjusting on it plastic lock.
Clock:, set the 12-hour display clock by pressing the SET button,
and then the corresponding time. (0455, as on the example)
The Display:
The Display shows you information, such as the current time, the
duration of a call, or the phone number you are currently dialing (the
last 12 digits dialed appear in the display)
Display Item Meaning
TONE The TONE/PULSE is set to TONE.
TEMP TONE The Temporary Tone feature is active
DATA PORT 1 The Data port is set to line 1
DATA PORT 2 The Data port is set to line 2
Low If flashing –battery is low and needs
to be changed, if not flashing battery
is dead or not installed.
n Represents the pound key (#)
A Represents the asterisk key (*) in a
number sequence.
[number (1-16)] The number in brackets indicates the
upper memory location of a phone number.
[number (1-16L)] The number in brackets indicates the
lower memory location of a phone number.
Speaker Function
To keep the best performance of the speaker functions avoid:
• Loud noises and echoes spaces. (The microphone may play those
sounds).
• Placing the phone on any vibration surface.